Cisco PA-4E1G/75

SKU: PA-4E1G/75 | MFG: Cisco
All Pre-owned equipment goes through our rigorous certification process in our state-of-the-art Spirent® testing & configuration lab. Our products test with a reliability rate of 99.97%.
Contact us for pricing on this item.

Orders over $50 receive free ground shipping

Satisfaction Guaranteed

Cisco 4 Port EI G.703 Serial 75OH Port Adapter
The PA-4E1G provide up to four E1 synchronous serial interfaces, which are compatible with and specified by G.703/G.704. The PA-4E1G network interfaces provide a connection between standard serial interfaces such as V.35 to telephone lines or Post, Telephone, and Telegraph (PTT) networks. Each PA-4E1G interface operates in full-duplex mode at E1 (2.046-Mbps) speed.The PA-4E1G interfaces do not operate in the data terminal equipment (DTE) and data communications equipment (DCE) modes that are typical of data communications interfaces. The PA-4E1G interfaces operate with either a line-recovered or an internal clock signal. The default is for a line clock signal that the interface recovers from the received data stream. The interface can also operate with an internal clock signal. The PA-4E1G generates the internal clock signal; the interface does not use the motherboard or system clock.Each PA-4E1G interface is available in either balanced (120-ohm) or unbalanced (75-ohm) mode; a unique port adapter supports each type. Neither the balanced and unbalanced modes nor the balanced and unbalanced cables are interchangeable; you cannot configure a balanced port to support an unbalanced line, nor can you attach an interface cable intended for a balanced line to an unbalanced port. Balanced interfaces typically use three conductors and three signal states: high, low, and ground. The high and low signals mirror each other. Unbalanced interfaces use only two signals: signal and ground. You can discover the mode of each interface by examining the agency approval label on each port adapter, or by using the show controller cbus command.

  • MainSpecs
    • E-1
    • 2 Mbps
    • 4 ports
    • Serial adapter
    • Serial
    • Cisco 7204 VXR
    • Cisco serial adapter - 4 ports
    • Plug-in module
    • Cisco IOS
  • Networking
    • HDB3
    • E-1
    • Serial
    • Port status
    • 2 Mbps
    • Wired
    • Full duplex capability
  • General
    • Serial adapter - 4 ports
    • Plug-in module
  • Miscellaneous
    • Standard
    • Retail
  • Expansion / Connectivity
    • 4 x serial - synchronous - 15 pin D-Sub (DB-15) - 4
    • 1 x expansion slot
  • Software / System Requirements
    • Cisco IOS
  • Compatibility Information
    • Cisco 7204 VXR


No one has written a review for this product. Login and be the first to write a review!


Our Premium Warranty Services give you the power of risk-free purchasing.

Vology provides a lifetime advanced replacement warranty on all certified pre-owned and surplus equipment. Please contact us and our Customer Care team will be ready to assist you. To insure the process is efficient please have the serial number, product number and invoice information available.

Chat Email Call Us

Monday - Friday

8am - 9pm EST

Customer Care

(888) 486-5649

+1 (813) 852-6401

Back to top