Cisco N4K-4001I-XPX

SKU: N4K-4001I-XPX | MFG: Cisco
All Pre-owned equipment goes through our rigorous certification process in our state-of-the-art Spirent® testing & configuration lab. Our products test with a reliability rate of 99.97%.
Contact us for pricing on this item.
Availability:

Orders over $50 receive free ground shipping

Satisfaction Guaranteed

Cisco Nexus 4001I Switch Module for IBM Blade Center - Switch - managed - 14 x backplane + 6 x SFP+ - plug-in module - DC power
The Cisco Nexus 4001I Switch Module for IBM Blade Center is a blade switch solution for IBM Blade Center H and HT chassis, providing the server I/O solution required for high-performance, scale-out, virtualized and nonvirtualized x86 computing architectures. It is a line-rate, extremely low-latency, nonblocking, Layer 2, 10 Gigabit Ethernet blade switch that is fully compliant with the INCITS Fiber Channel over Ethernet (FCoE) and IEEE 802.1 Data Center Bridging (DCB) standards.At the center of the Cisco Nexus 4001I is the unified switch application-specific integrated circuit (ASIC), a purpose-built, high-performance, line-rate switch ASIC that delivers extremely low and consistent latency across all packet sizes independent of the configured networking features. The unified switch ASIC supports standard Ethernet as well as Priority Flow Control (PFC) and Enhanced Transmission Selection, required for lossless Ethernet transmission. Using the combination of the unified switch ASIC and Cisco NX-OS, the Cisco Nexus 4001I extends the benefits of the Cisco Nexus family of data center switches to blade servers: the fastest growing segment of the server market.

  • MainSpecs
    • 1 year warranty
    • 1 year warranty
    • ACL entries : 512 ¦ Rapid Spanning Tree Protocol instances : 3000 ¦ Multiple Spanning Tree Protocol instances : 10000 ¦ QoS hardware queues per port : 8
    • Switching capacity : 400 Gbps ¦ Forwarding performance : 300 Mpps
    • 9216 bytes
    • 10 Gigabit Ethernet
    • Cisco Nexus 4001I Switch Module for IBM Blade Center - switch - 20 ports - managed - plug-in module
    • Layer 2 switching, auto-sensing per device, auto-negotiation, VLAN support, Syslog support, DiffServ support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
    • 11.6 in x 10.3 in x 0.8 in
    • 4 lbs
    • DC 12 V
    • Switch - 20 ports - managed
    • IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
    • Plug-in module
    • SNMP 1, SNMP 2, RMON, SNMP 3
    • 14 x backplane + 6 x SFP+
    • 8K entries
    • 10 Gigabit Ethernet
  • Environmental Parameters
    • 158 °F
    • 5 - 95% (non-condensing)
    • -13 °F
    • 10 - 85%
    • 32 °F
    • 104 °F
  • Manufacturer Warranty
    • Limited warranty - advance parts replacement - 1 year - response time: 10 days
    • 1 year warranty
  • General
    • 9216 bytes
    • ACL entries : 512 ¦ Rapid Spanning Tree Protocol instances : 3000 ¦ Multiple Spanning Tree Protocol instances : 10000 ¦ QoS hardware queues per port : 8
    • Switching capacity : 400 Gbps ¦ Forwarding performance : 300 Mpps
    • 10 Gigabit Ethernet
    • SNMP 1, SNMP 2, RMON, SNMP 3
    • 2 GB - DDR2 SDRAM
    • Port status, power
    • Plug-in module
    • Switch - 20 ports - managed
    • 8K entries
    • 1 GB
    • IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP)
    • Layer 2 switching, auto-sensing per device, auto-negotiation, VLAN support, Syslog support, DiffServ support, half duplex mode, full duplex mode, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, priority-based flow control, enhanced transmission selection, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
    • 14 x backplane + 6 x SFP+
    • 10 Gigabit Ethernet
  • Miscellaneous
    • 0.8 in
    • 10.3 in
    • 187,265 hour(s)
    • 11.6 in
    • 4 lbs
    • TUV, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, IEC950, UL 1950, VDE, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, EMC, ICES-003 Class A, RoHS, FCC CFR47 Part 15, CSA C22.2 No. 950
  • Power
    • Power supply - internal
    • 69 Watt
    • DC 12 V
  • Expansion / Connectivity
    • 1 x 10Base-T/100Base-TX/1000Base-T - RJ-45 - management ¦ Serial : 1 x RS-232 - RJ-45 ¦ Network : 14 x backplane ¦ 6 x SFP+
  • Dimensions & Weight
    • 4 lbs
    • 0.8 in
    • 10.3 in
    • 11.6 in

Reviews

No one has written a review for this product. Login and be the first to write a review!

Returns

Our Premium Warranty Services give you the power of risk-free purchasing.

Vology provides a lifetime advanced replacement warranty on all certified pre-owned and surplus equipment. Please contact us and our Customer Care team will be ready to assist you. To insure the process is efficient please have the serial number, product number and invoice information available.

Chat Email Call Us

Monday - Friday

8am - 9pm EST

customercare@vology.com

Customer Care

(888) 486-5649

+1 (813) 852-6401

Back to top