APC AP8941

SKU: AP8941 | MFG: APC

Vology is a certified APC partner. We provide the standard warranty options available from APC.

Contact us for pricing on this item.
Availability:

Orders over $50 receive free ground shipping

Satisfaction Guaranteed

APC Switched Rack PDU 2G Zero U - Power distribution unit ( rack-mountable ) - AC 200/208/230 V - Ethernet, RS-232, USB - 24 output connector(s)
Switched Rack PDUs provide advanced load monitoring combined with remote on/off switching control of individual outlets for power cycling, delayed power sequencing, and outlet use management.APC by Schneider Electric Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power cycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing time delays allow users to define the order in which to power up or down attached equipment to avoid circuit overload. Current metering provides real-time remote monitoring of connected loads with user-defined alarms to warn of potential circuit overloads. New AP8000 series Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and ultra low profile circuit breakers.User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, Command Line Interface, or Telnet Interfaces which are complimented by Schneider Electric's StruxureWare solution.Network Management - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Remote Management Capabilities - Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.Alarm Thresholds - Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities.).Local Current Monitoring Display - The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only).Power Delays - Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly.Load Indicator LED - Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.Flash Upgradeable - Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only).

  • Compatibility Information
    • P/N: AR3100
  • MainSpecs
    • 1 x power NEMA L6-30
    • P/N: AR3100
    • 3 x power IEC 320 EN 60320 C19 ¦ 21 x power IEC 320 EN 60320 C13
    • 1 x power NEMA L6-30
    • 3 x power IEC 320 EN 60320 C19 ¦ 21 x power IEC 320 EN 60320 C13
    • AC 200/208 V
    • AC 200/208/230 V
    • SNMP, Telnet, HTTP
    • Japan, Canada, United States
    • Power distribution unit - rack-mountable
    • Ethernet, RS-232, USB
    • APC Switched Rack PDU 2G Zero U - power distribution unit
    • 2 years warranty
    • 16.8 lbs
    • 2.2 in x 1.8 in x 72 in
  • Power Device
    • 1 x power NEMA L6-30
    • 30 A
    • 50/60 Hz
    • AC 200/208/230 V
    • AC 200/208 V
    • 1 x power NEMA L6-30
    • 3 x power IEC 320 EN 60320 C19 ¦ 21 x power IEC 320 EN 60320 C13
  • Dimensions & Weight
    • 2.2 in
    • 72 in
    • 1.8 in
    • 16.8 lbs
  • Manufacturer Warranty
    • 2 years warranty
    • Limited warranty - 2 years
  • General
    • Black
    • Power distribution unit - rack-mountable
    • Japan, Canada, United States
  • Expansion / Connectivity
    • 1 x management (Ethernet) - RJ-45 ¦ 1 x management (RS-232) ¦ 1 x management (USB)
  • Environmental Parameters
    • 23 °F
    • 113 °F
    • 5 - 95%
  • Networking
    • Ethernet, RS-232, USB
    • SNMP, Telnet, HTTP
  • Dimensions & Weight (Shipping)
    • 4.9 in
    • 6.5 in
    • 22 lbs
    • 80.3 in
  • Miscellaneous
    • LCD display, current meter, LED indicators, overload protection
    • Included
    • UL, cUL, ICES-003, VCCI Class A ITE, RoHS, FCC Part 15 A, PSE Mark, REACH
    • 1 x power cable - external - 10 ft ¦ 1 x serial cable - external

Reviews

No one has written a review for this product. Login and be the first to write a review!

Returns

Vology’s authorized distribution partners offer returns for most items within 30 days of receipt of shipment. Vology will facilitate returns processing on your behalf during the distribution return period. Return requests exceeding 30 days from receipt are typically handled directly through manufacturers and associated warranties. Vology is here to assist you with products or services that may have return policies or requirements that differ from the above.

Chat Email Call Us

Monday - Friday

8am - 9pm EST

customercare@vology.com

Customer Care

(888) 486-5649

+1 (813) 852-6401

Back to top